more | Slec Engine Mount And Screws .049 (SL06D)
| |
more | Radio Active Engine Mount 19-30 (RAA1077)
Designed for screw mounting to a bulkhead, each mount has grooves to trap a fixed noseleg behind it – no matter which way up you mount the engine. Supplied with four self-tapping screws, each mount is moulded from tough glass filled nylon and is available in a variety of sizes to suit the engine you wish to mount. Three mounts with extra long beams are available which are suitable for both two and four stroke engines.
| |
more | Radio Active Engine Mount 30-45 (RAA1078)
Designed for screw mounting to a bulkhead, each mount has grooves to trap a fixed noseleg behind it – no matter which way up you mount the engine. Supplied with four self-tapping screws, each mount is moulded from tough glass filled nylon and is available in a variety of sizes to suit the engine you wish to mount. Three mounts with extra long beams are available which are suitable for both two and four stroke engines.
| |
more | Radio Active Engine Mount 30-45 Long (LRAA1505)
Designed for screw mounting to a bulkhead, each mount has grooves to trap a fixed noseleg behind it – no matter which way up you mount the engine. Supplied with four self-tapping screws, each mount is moulded from tough glass filled nylon and is available in a variety of sizes to suit the engine you wish to mount. Three mounts with extra long beams are available which are suitable for both two and four stroke engines. | |
more | Radio Active Engine Mount 45-61 Long (LRAA1510)
Designed for screw mounting to a bulkhead, each mount has grooves to trap a fixed noseleg behind it – no matter which way up you mount the engine. Supplied with four self-tapping screws, each mount is moulded from tough glass filled nylon and is available in a variety of sizes to suit the engine you wish to mount. Three mounts with extra long beams are available which are suitable for both two and four stroke engines. | |
more | Radio Active Engine Mount 60-90 Long (LRAA1515)
Designed for screw mounting to a bulkhead, each mount has grooves to trap a fixed noseleg behind it – no matter which way up you mount the engine. Supplied with four self-tapping screws, each mount is moulded from tough glass filled nylon and is available in a variety of sizes to suit the engine you wish to mount. Three mounts with extra long beams are available which are suitable for both two and four stroke engines. | |
stock
info | Slec 3mm x 25mm Nut/Bolts Pack 6 (SL043F)
| |
stock
info | Slec 4mm x 25mm Nut/Bolt/Washer Pk 6 (SL043G)
| |
more | Ripmax External Charge Holder (PR4ECH)
This nifty little number allows you to charge your receiver battery pack from the outside of the aircraft. Simply fit the External Charge Holder to the side of the fuselage, with the charge flylead from the switch harness mounted in the holder. This way you can just plug the charger lead into the side of the model to top up for your next day of flying. | |
more | Radio Active Servo Mounting Bracket c/w Screws (RCA190)
Radio Active's servo mount bracket converts just about any servo from beam to side wall fixing. Neat, light and very practical. | |
more | Radio Active Wing Servo Mounting Set (Pk2) (RCA210)
Radio Active's servo mount bracket converts just about any servo from beam to side wall fixing. Neat, light and very practical.
| |
more | Perkins Wing Servo Mount Micro (5508013)
| |
more | Radio Active Armour Guard RX Packing (FRAA1065)
No installation is complete without plenty of foam packing around the receiver and battery. With the tubular packing, simply cut off the length you require and insert your receiver or battery. Couldn't be simpler, or safer.
| |
more | Perkins Receiver Strongbox (7720980)
more.. | |
more | Slec Servo Screws And Washers (SL009)
| |
more | Ripmax Tie Straps 4" Fl. Yellow Pk 20 (IP220FY)
| |
more | Ripmax Hook & Loop 1" x 6 (TIP210B)
| |
more | Ripmax Servo Tape 1.5" x 18" (A1020)
For simple servo installation, there's nothing as quick as servo tape. With its shock absorbing qualities it can also reduce damage to radio equipment through vibration. Ultra-sticky, it's designed to stay put! | |
more | Ripmax Self Adhesive Velcro Tape (FMG090O)
| |
more | Radio Active Wing Seating Tape 12mm (RAA1063)
Close any gaps between the wing and fuselage to form an almost air-tight seal. Also stops the fuselage chaffing on the wing and protects its finish. Available in a variety of widths and lengths to suit the model you're building. | |
more | Ripmax Wing Joining Kit (SP1140)
Supplied as a pack containing enough SP113 resin and hardener, plus a length of fibreglass bandage, to reinforce one wing centre section. No waste! | |
more | Slec White Rubber Bands 3" (24) (SL44)
| |
more | Slec White Rubber Bands 4" (12) (SL44A)
| |
more | Slec White Rubber Bands 5" (10) (SL44B)
| |
more | Slec White Rubber Bands 6" (5) (SL44C)
| |
more | Slec White Rubber Bands 8" (4) (SL44E)
| |
more | Radio Active M4 Wing Bolt with Nut x2 (RAA1091)
Cheese head bolts moulded in nylon for quick break in case of impact. Supplied with blind nuts that embed into wooden fuselage or firewall. | |
stock
info | Radio Active Mini Skid with Screws (RAA1350)
| |
more | Irvine Stick On Lead Weights (IRVSL02)
These lead weights are invaluable in ballancing your aircraft. With a sticky backing for mounting, these lead weights are supplied segmented in 1/2oz portions, so you can work out exactly what's going on with the model. No more moving tanks & batteries to find the C of G. | |
more | Perkins 1/5 1/5 Scale British WW1 Pilot (5508289)
more.. | |
more | Perkins 1/9 Jet Pilot Figure Unpainted (5508330)
more.. | |
more | Perkins 1/10 Small Civilian Pilot (5508426)
more.. | |
more | Perkins 1/10 Pilot British WWII 1/10 Scale (5508340)
| |
more | Perkins 1/8 Pilot British WWII 1/8 Scale (5508369)
more.. | |
more | Perkins 1/6 1/6 Scale British WW2 Pilot (5508296)
| |
more | Perkins 1/3 Pilot Civilian 1/3 Scale (5508265)
more.. | |
more | Perkins 1/8 Pilot Civilian 1/8 Scale (5508367)
more.. | |
more | Perkins 1/9 Pilot Female 1/9 Scale (5508323)
more.. | |
more | Perkins Aircraft Navigation Light Set (5507955)
| |
more | Ripmax Canopy Latch Sprung (RMX010)
This inconspicuous and lightweight, yet very durable canopy
latch system is a must for every building bench. Each pack
contains 2 sprung and 2 solid fixing points. Secure with glue.
| |
stock
info | Robart Mechanical Nose Gear Retracts (15-40 Size) (602)
| |
stock
info | RC System Fly Bar Set for Colibre (RC3910-9)
| |
Flying Models
Search
Index
Checkout
Back