The Graupner model of the Christen Eagle II is a detailed scale version of the full-size aerobatic aircraft. The model components are supplied with the flamboyant colour scheme already applied. From a hard strip the aeroplane is capable of taking off very realistically, although it can be hand-launched equally easily. Once in the air, the Christen Eagle II provides an impressive aerial appearance which is underlined by the pleasant sound of the Speed 300 direct-drive power system. The model can be completed in a very short time. The Li-Po battery is installed in the underside of the fuselage under a battery flap with quick-release latches. The model features "full-house" controls for scale aerobatics, and looks totally convincing in the air.

Wingspan: 870mm (34”) Requires 4 channel  35Mhz Radio (with 3 Micro Servos), and Power Set

Thunder Tiger have produced this fun representation of the sports classic in a profile park flyer. As with the real thing, some construction is required before you get to experience the thrills of aerobatic flight, but weighing in at a mere 265g this beauty will keep you on your toes. The kit comes as a flatpack, and includes a 6:1 gearbox & motor combination.

Length: 835mm (17'') Wingspan: 800mm (16”) Requires 4 channel  35Mhz Radio (with 2 x Naro Servos), and Power Set

The new Graupner BF-109 is a detailed RC model based on the full-size aircraft. The highly decorative colour scheme is factory-applied to the model components, and the aeroplane can be assembled and made ready-to-fly very quickly. The recommended Speed 400 power set is attached to the prepared motormount using four screws, while the Li-Po batteries are installed in the underside of the fuselage under a battery flap with quick-release latches. The models feature "full-house" controls, and look totally convincing in the air.

Wingspan: 910mm (36”) Requires 4 channel  35Mhz Radio (with 3 Micro Servos), and Power Set

The new Graupner SU-31 is a detailed RC model based on the full-size aircraft. The highly decorative colour scheme is factory-applied to the model components, and the aeroplane can be assembled and made ready-to-fly very quickly. The recommended Speed 400 power set is attached to the prepared motormount using four screws, while the Li-Po batteries are installed in the underside of the fuselage under a battery flap with quick-release latches. The models feature "full-house" controls, and look totally convincing in the air.

The new Graupner Pitts S-2A is a detailed RC model based on the full-size aircraft. The highly decorative colour scheme is factory-applied to the model components, and the aeroplane can be assembled and made ready-to-fly very quickly. The recommended Speed 400 power set is attached to the prepared motormount using four screws, while the Li-Po batteries are installed in the underside of the fuselage under a battery flap with quick-release latches. The models feature "full-house" controls, and look totally convincing in the air.

Wingspan: 870mm (33”) Requires 4 channel  35Mhz Radio (with 3 Micro Servos), and Power Set

The new Graupner Mustang P-51 is a detailed RC model based on the full-size aircraft. The highly decorative colour scheme is factory-applied to the model components, and the aeroplane can be assembled and made ready-to-fly very quickly. The recommended Speed 400 power set is attached to the prepared motormount using four screws, while the Li-Po batteries are installed in the underside of the fuselage under a battery flap with quick-release latches. The models feature "full-house" controls, and look totally convincing in the air.

Wingspan: 910mm (36”) Requires 4 channel  35Mhz Radio (with 3 Micro Servos), and Power Set

This is a fantastic replica of the Formula One Gold Race Winner, Piloted and Designed Jon Sharp. John went on to win the the Reno Air Race with the NEMESIS. The NEMESIS holds the speed record for Formula I aircraft at 283.75 mph.

Wingspan: 640mm (26”) Requires 4 channel  35Mhz Radio (with 3 Micro Servos), and Power Set

The GRAUPNER SUKHOI SU 31 D is a highly attractive semi-scale model. It features "full-house" controls plus throttle, is fully aerobatic and is equally at home indoors or outdoors as a park-fly model. With the recommended GRAUPNER COMPACT motor the aircraft offers a superb performance. All wing and tailplane parts are laser-cut from 3 mmDepron®. The two Depron® fuselage shells are vacuum-moulded, and are supplied pre-trimmed, ready for gluing. Virtually all reinforcements are supplied in the kit in the form of profiled CFRP strip material.

Wingspan: 645mm (26”) Requires 4 channel  35Mhz Radio (with 4 Servos), and Power Set

A ready to fly 35MHz FM mini delta that just needs your transmitter (delta mix required) and an RX crystal to be up and running. Moulded from one piece of impact resistant EPS, but with nice touches like a plastic top cover/radio hatch and Depron fins. Amazing as it seems, this model has a single 1300mah 3.7v Li-Po battery that powers both the motor and the RC system using a stepup transformer. Even then, fast and furious flights of 10 mins are still possible. And, with a wing loading of only 28g/dm2 (9.2oz/ft2), she's still pretty docile at low speed. Supplied complete with a dedicated charger for the Li-Po.

Wingspan: 565mm (22”) Requires 4 channel  35Mhz Radio & Mixer

Simple to assemble delta wing elecrtic powered RC aircraft kit. Moulded from lightweight polystyrene and supplied with a geared 380 motor and propeller.

Wingspan: 838mm (33”) Requires 4 channel  35Mhz Radio (with 2 Micro Servos) & Mixer, and Power Set

The ultimate in Elecrtic Jets. Supplied in kit form with injection moulded parts and pre-skinned wings. The PowerFan unit is included.

Requires 4 channel  35Mhz Radio (with 2 Micro Servos) & Mixer, and Power Set

The Oxalys was designed by Christophe Paysant-Le Roux (8-time F3A World Champion). It is the scaled down replica of his 2005-2006 F3A championship plane, built from precision laser cut contest balsa. Main structure comes pre-built and covered. The Oxalys flies a wide range of smooth and precise aerobatic maneuvers such as "Waterfalls", "point rolls", "rolling circles", "snap rolls", "hovering", "harrier", and precision F3A flying. Includes great instructions and builds in about 4-6 hours.

Requires 4 channel  35Mhz Radio (with 4 Micro Servos), and Power Set

A fantastic model with fantastic performance, that’s the Mini Pulse XT from E-Flite. An almost ready to fly electric sport model with the ability to fly the full range of aerobatics it does however retain a degree of stability that is ideal for newer or less experienced pilots. The airframe features lightweight balsa and lite-ply construction throughout which is complimented with a pre-painted fibreglass cowling, wheel spats, and pre-painted aluminium landing gear. All of the hinges and control horns are factory installed, and the steerable tailwheel makes ground handling easy. The Pulse XT is a strikingly good-looking model with a sleek, slim fuselage and dynamic colour scheme in Ultracote®. Of course Pulse XT looks on the ground, but once in the air the flight performance more than matches these good looks.

Wingspan: 1080mm (42”) Requires 4 channel  35Mhz Radio (with 4 Micro Servos), and Power Set

The Wattage Extra 330I is superbly aerobatic, designed for brushless motor systems this model is capable of anything.

Requires 4 channel  35Mhz Radio (with 4 Micro Servos), and Power Set